Diffusion-ordered Spectroscopy Research Articles

Metabolomics analysis using matrix-assisted diffusion-ordered spectroscopy (DOSY) and its application in acrylamide-induced cardiovascular toxicity

Untargeted NMR-based metabolomics strategies are increasingly applied for metabolite screening in a wide variety of medical conditions. However, the identification of metabolites remains a great challenge in NMR metabolomics research. Here, we used matrix-assisted diffusion-ordered spectroscopy (DOSY) to identify new biomarkers in body fluids. DOSY-based metabolomics can exploit the unique strengths of NMR and, thanks to improvements in its resolution, can be successfully used to address a significantly wider range of biological issues. In this study, a metabolite model consisting of ten common metabolites was employed to optimize the matrix-assisted DOSY experimental parameters. Polyvinylpyrrolidone (PVP), a high-molecular-weight polymer, was found to be the most appropriate matrix with which to accomplish the separation of the mixture components. 1H NMR and PVP-assisted DOSY analyses were performed to characterize the metabolic profile of serum samples from acrylamide (ACR)-treated rats and study the mechanism of ACR-induced cardiovascular toxicity. Biomarker identification by 1H NMR and PVP-assisted DOSY yielded similar results. However, multivariate statistical analysis showed that, compared with 1H NMR, PVP-assisted DOSY achieved a better discrimination of the serum samples obtained from rats treated with different doses of ACR. A total of 11 differential metabolites were identified. An enrichment analysis of the metabolic pathways showed that, in rats treated with a high dose of ACR, the glutamate and glutathione metabolic pathways and the energy metabolism pathway of the tricarboxylic acid cycle were mainly affected.

Characterizing the oligomers distribution along the aggregation pathway of amyloid Aß1-40 by NMR.

This study delves into the early aggregation process of the Aβ1-40 amyloid peptide, elucidating the associated oligomers distribution. Motivated by the acknowledged role of small oligomers in the neurotoxic damage linked to Alzheimer's disease, we present an experimental protocol for preparing 26-O-acyl isoAβ1-40, a modified Aβ1-40 peptide facilitating rapid isomerization to the native amide form at neutral pH. This ensures seed-free solutions, minimizing experimental variability. Additionally, we demonstrate the efficacy of coupling NMR diffusion ordered spectroscopy (DOSY) with the Inverse Laplace Transform (ILT) reconstruction method, for effective characterization of early aggregation processes. This innovative approach efficiently maps oligomers distributions across a wide spectrum of initial peptide concentrations offering unique insights into the evolution of oligomers relative populations. As a proof of concept, we demonstrate the efficacy of our approach assessing the impact of Epigallocathechin gallate, a known remodeling agent of amyloid fibrils, on the oligomeric distributions of aggregated Aß1-40. The DOSY-ILT proposed approach stands as a robust and discriminating asset, providing a powerful strategy for rapidly gaining insight into potential inhibitors' impact on the aggregation process.

Impact of Single Acyclic Phosphonate Nucleotide (ZNA) Modifications on DNA Duplex Stability.

An acyclic phosphonate-linked nucleic acid backbone (ZNA) demonstrated the capability to support duplex formation and propagate genetic information in vivo, unveiling its potential for evolution into a synthetic genetic system (XNA). To determine the structural impact of such modification, modified Dickerson Drew DNA dodecamers (DDDs) were prepared by solid phase synthesis, each containing either an (R) or (S) isomeric form of a cytosine ZNA nucleotide. While the DDD is known to adopt a stable duplex, both duplex and hairpin forms were simultaneously observed for both modified oligonucleotides by NMR spectroscopy over a broad temperature range (5-65 °C). Diffusion-ordered spectroscopy (DOSY) experiments allowed to separate duplex and hairpin signals based on the different diffusion constants of both conformational states. For the oligomer containing (R)-ZNA, only the duplex form occurred at 5 °C, while it was not possible to determine by NMR a single hairpin conformation at higher temperatures. In the case of the (S)-ZNA nucleoside modified oligomer, both hairpin and duplex forms were observable at 0 °C, while a single hairpin conformation was detected at 37 °C, suggesting a higher destabilizing effect on dsDNA.

Dual Structure of a Vanadyl-Based Molecular Qubit Containing a Bis(β-diketonato) Ligand.

We designed [VO(bdhb)] (1') as a new electronic qubit containing an oxovanadium(IV) ion (S = 1/2) embraced by a single bis(β-diketonato) ligand [H2bdhb = 1,3-bis(3,5-dioxo-1-hexyl)benzene]. The synthesis afforded three different crystal phases, all of which unexpectedly contain dimers with formula [(VO)2(bdhb)2] (1). A trigonal form (1h) with a honeycomb structure and 46% of solvent-accessible voids quantitatively transforms over time into a monoclinic solvatomorph 1m and minor amounts of a triclinic solventless phase (1a). In a static magnetic field, 1h and 1m have detectably slow magnetic relaxation at low temperatures through quantum tunneling and Raman mechanisms. Angle-resolved electron paramagnetic resonance (EPR) spectra on single crystals revealed signatures of low-dimensional magnetic behavior, which is solvatomorph-dependent, being the closest interdimer V···V separations (6.7-7.5 Å) much shorter than intramolecular V···V distances (11.9-12.1 Å). According to 1H diffusion ordered spectroscopy (DOSY) and EPR experiments, the complex adopts the desired monomeric structure in organic solution and its geometry was inferred from density functional theory (DFT) calculations. Spin relaxation measurements in a frozen toluene-d8/CD2Cl2 matrix yielded Tm values reaching 13 μs at 10 K, and coherent spin manipulations were demonstrated by Rabi nutation experiments at 70 K. The neutral quasi-macrocyclic structure, featuring nuclear spin-free donors and additional possibilities for chemical functionalization, makes 1' a new convenient spin-coherent building block in quantum technologies.

Molecular insights into fragrance release from SDS and SLES micelles

Molecular insights into fragrance release from SDS and SLES micelles

Using Nuclear Magnetic Resonance to Troubleshoot a Stability Issue in a Real-World Formulation Chassis-Application to Consumer Oral Healthcare.

With direct application to current and future consumer healthcare products, this research sheds light on the importance of packaging and its potential effects on both Active Pharmaceutical Ingredient (API) delivery and stability. Industrially sourced, proprietary experimental formulations (PEFs), specifically oral cleansers, based on salicylic acid and hydrogen peroxide, discolored over time at different rates, depending on packaging type used. This discoloration stemmed from an interplay of two factors, involving both spontaneous formulation degradation and the interaction of both degradants and salicylic acid with the internal surface of the packaging. This manuscript reports on the investigation to uncover the origins of discoloration. To investigate this real-world, industrial pipeline problem, we exploited the high dimensionality and simple sample preparation uniquely afforded by NMR. Using a combination of 1D/2D NMR and diffusion-ordered NMR spectroscopy (DOSY) to leverage molecular mass estimations from, we not only quickly confirmed the identities of these degradants, but also assessed their formation as a function of temperature and pH, providing insight into the mechanisms underlying their formation. We were able to identify catechol as the main source of discoloration over a period of several weeks, being formed at the ppm level. Furthermore, we evaluated the formulation-container interaction, employing NMR, ICP-MS, and ATR-IR. Despite this comprehensive analysis, the root causes of discoloration could only tentatively be assigned to a surface Ti complex of salicylic acid and other hydroxy carboxylic acids. Through the understanding of formulation degradation pathways, we were able to support further toxicology assessment, vital to both consumer safety and the manufacturer. This work underscores the invaluable role of NMR in the analysis of intricate proprietary mixtures with a consumer-centric purpose. Our findings demonstrate that conventional analytical techniques falter in the face of such complexity, requiring extensive preparation and pre-analytical processing, highlighting the novelty and crucial relevance of NMR research to manufacturers and consumers. Such an analysis is of value in the pursuit of materials within the consumer-healthcare space, which meet the requirements for successful recycling or re-use.

Online coupling of liquid chromatography and two-dimensional diffusion ordered spectroscopy for the analysis of oligostyrenes

The aim of this study was to introduce a powerful coupling of Liquid Adsorption Chromatography (LAC) and Diffusion-Ordered Spectroscopy (DOSY) for comprehensive structure analysis. This new hyphenation approach facilitated the simultaneous separation of a polymer mixture and the determination of molar masses within a single 3D experiment. The online coupling of High-Performance Liquid Chromatography (HPLC) and two-dimensional DOSY-NMR will be called 3D-LAC-NMR-DOSY experiment. Our methodology enabled the chromatographic separation of analytes based on their chemical heterogeneity, and provided accurate molar masses of the analytes through 2D-DOSY. This new method was demonstrated on a polystyrene oligomer mixture. In this case, the oligostyrenes could be separated with LAC according to their tacticity and chain length in protonated acetonitrile as eluent and DOSY measurements provided the molar masses of each oligomer. In order to show the power of the 3D-LAC-NMR-DOSY method, the comparison to 2D-DOSY, 3D-DOSY and LAC-NMR was separately evaluated. Furthermore, the recently published solvent-independent molar mass calibration of diffusion coefficients was also successfully applied in our LAC-DOSY studies for molar mass predictions of the oligomers in acetonitrile. The predicted molar masses were in good agreement with the LAC-DOSY measurements and were verified by calibrations of diffusion coefficients and mass spectrometry. Finally, this pioneering 3D technique offers a powerful new tool for advancing structure analysis and enhancing our understanding of complex systems such as oligostyrenes.

MaDDOSY (Mass Determination Diffusion Ordered Spectroscopy) using an 80MHz Bench Top NMR for the Rapid Determination of Polymer and Macromolecular Molecular Weight.

Measurement of molecular weight is an integral part of macromolecular and polymer characterization which usually has limitations. Herein, this article presents the use of a bench-top 80MHz Nuclear Magnetic Resonance (NMR) spectrometer for diffusion-ordered spectroscopy as a practical and rapid approach for the determination of molecular weight/size using a novel solvent and polymer-independent universal calibration.

Effects of Drug Conjugation on the Biological Activity of Single-Chain Nanoparticles.

The field of single-chain nanoparticles (SCNPs) continues to mature, and an increasing range of reports have emerged that explore the application of these small nanoparticles. A key application for SCNPs is in the field of drug delivery, and recent work suggests that SCNPs can be readily internalized by cells. However, limited attention has been directed to the delivery of small-molecule drugs using SCNPs. Moreover, studies on the physicochemical effects of drug loading on SCNP performance is so far missing, despite the accepted view that such small nanoparticles should be significantly affected by the drug loading content. To address this gap, we prepared a library of SCNPs bearing different amounts of a covalently conjugated therapeutic drug-sulfasalazine (SSZ). We evaluated the impact of the conjugated drug loading on both the synthesis and biological activity of SCNPs on pancreatic cancer cells (AsPC-1). Our results reveal that covalent drug conjugation to the side chains of the SCNP polymer precursor interferes with chain collapse and cross-linking, which demands optimization of reaction conditions to reach high degrees of cross-linking efficiencies. Small-angle neutron scattering and diffusion-ordered spectroscopy nuclear magnetic resonance (DOSY NMR) analyses reveal that SCNPs with a higher drug loading display larger sizes and looser structures, as well as increased hydrophobicity associated with a higher SSZ content. Increased SSZ loading led to reduced cellular uptake when assessed in vitro, whereby SCNP aggregation on the surface of AsPC-1 cells led to reduced toxicity. This work highlights the effects of drug loading on the drug delivery efficiency and biological behavior of SCNPs.

Spatially encoded pure-shift diffusion-ordered NMR spectroscopy yielded by chirp excitation

Spatially-encoded diffusion-ordered NMR spectroscopy (SPEN-DOSY) has emerged as a new time-efficient tool for the analysis of mixtures of small molecules in solution. Time efficiency is achieved using the concept of spatial parallelization of the effective gradient area, instead of the sequential incrementation used in conventional diffusion experiments. The data acquired with such sequences are then usually processed to extract diffusion coefficients, but cases when peak overlap in the 1H spectrum are difficult to address. Such limitation in conventional diffusion experiments is addressed via using the Pure Shift Yielded by CHirp Excitation (PSYCHE)-iDOSY sequence. Here we have adapted the PSYCHE-iDOSY sequence by using echo planar spectroscopic imaging (EPSI) to acquire SPEN-DOSY data. The pure shift mode of PSYCHE separates the overlapped components and a modified Stejskal-Tanner equation is used to extract the corresponding diffusion coefficient. The primary results obtained with the above-mentioned mixtures seem to open the possibility of separating complex mixtures in less time than PSYCHE-iDOSY.

Quantitative at-line monitoring of enzymatic hydrolysis using benchtop diffusion nuclear magnetic resonance spectroscopy.

Benchtop diffusion nuclear magnetic resonance (NMR) spectroscopy was used to perform quantitative monitoring of enzymatic hydrolysis. The study aimed to test the feasibility of the technology to characterize enzymatic hydrolysis processes in real time. Diffusion ordered spectroscopy (DOSY) was used to measure the signal intensity and apparent self-diffusion constant of solubilized protein in hydrolysate. The NMR technique was tested on an enzymatic hydrolysis reaction of red cod, a lean white fish, by the endopeptidase alcalase at 50°C. Hydrolysate samples were manually transferred from the reaction vessel to the NMR equipment. Measurement time was approximately 3 min per time point. The signal intensity from the DOSY experiment was used to measure protein concentration and the apparent self-diffusion constant was converted into an average molecular weight and an estimated degree of hydrolysis. These values were plotted as a function of time and both the rate of solubilization and the rate of protein breakdown could be calculated. In addition to being rapid and noninvasive, DOSY using benchtop NMR spectroscopy has an advantage compared with other enzymatic hydrolysis characterization methods as it gives a direct measure of average protein size; many functional properties of proteins are strongly influenced by protein size. Therefore, a method to give protein concentration and average size in real time will allow operators to more tightly control production from enzymatic hydrolysis. Although only one type of material was tested, it is anticipated that the method should be applicable to a broad variety of enzymatic hydrolysis feedstocks.

A dynamic covalent approach to [PtnL2n]2n+ cages.

A dynamic covalent approach was exploited to generate a family of homometallic [PtnL2n]2n+ cage (predominantly [Pt2L4]4+ systems) architectures. The family of platinum(II) architectures were characterized using 1H nuclear magnetic resonance (NMR) and diffusion ordered spectroscopy (DOSY), electrospray ionization mass spectrometry (ESI-MS) and the molecular structures of two cages were determined by X-ray crystallography.

Towards the universal use of DOSY as a molar mass characterization tool: temperature dependence investigations and a software tool to process diffusion coefficients

The temperature dependence of DOSY molar mass determination is discussed.

Preparation of poly(oxanorbornene) based single and double-folding polymers via nucleophilic aromatic substitution reaction

A facile approach is introduced to prepare single-chain nanoparticles (SCNPs) utilizing intramolecular crosslinking based on nucleophilic aromatic substitution reaction. The linear polymeric precursor comprising dichlorotriazine (DCT) moiety as a reactive pendant group is synthesized via ring-opening metathesis polymerization (ROMP). The reactive chlorine atoms on DCT motifs are substituted with a dithiol nucleophile in varying degrees to yield individually intramolecularly crosslinked polymer nanoparticles. In addition, double-collapse and modification reactions are exploited through the substitution reaction from the remaining unreacted chlorine atoms. A significant reduction in hydrodynamic volumes of the corresponding SCNPs is observed compared to their linear analogues. The obtained nanoparticles are characterized by size exclusion chromatography (SEC), proton nuclear magnetic resonance spectroscopy (1H NMR), diffusion-ordered spectroscopy (DOSY), dynamic light scattering (DLS), and transmission electron microscopy (TEM) techniques.

The Universal Calibration for Structure- and Solvent-Independent Molar Mass Determinations of Polymers Using Diffusion-Ordered Spectroscopy.

It will be shown how diffusion-ordered spectroscopy (DOSY) can produce a universal calibration of molar mass dependences of polymers compared to size exclusion chromatography (SEC) or recently published DOSY methods. Whereas SEC can deliver only structure-independent universal calibrations for a particular solvent, DOSY was used for creating solvent-independent calibrations for a certain polymer. Now, we can demonstrate a universal calibration method that generates both a structure- and solvent-independent molar mass calibration. Only one mathematical function describes the structure- and solvent-independent calibrations for DOSY by implementing the Mark-Houwink approach. The derived equation is tested on polystyrene (PS), poly(ethylene oxide), and poly(methyl methacrylate) of different molar masses and in different solvents. Altogether, 94 diffusion coefficients representing 16 molar mass calibrations of the diffusion coefficients in 10 different solvents could be perfectly matched to one universal calibration function with an average deviation of just 2.5%. It was also found that the Mark-Houwink parameters calculated by DOSY are very close to the SEC data. In any case, this new approach is a very useful tool for the determination of molar masses and new Mark-Houwink parameters via DOSY.

Monitoring galactolipid digestion and simultaneous changes in lipid-bile salt micellar organization by real-time NMR spectroscopy

The use of Nuclear Magnetic Resonance spectroscopy for studying lipid digestion in vitro most often consists of quantifying lipolysis products after they have been extracted from the reaction medium using organic solvents. However, the current sensitivity level of NMR spectrometers makes possible to avoid the extraction step and continuously quantify the lipids directly in the reaction medium. We used real-time 1H NMR spectroscopy and guinea pig pancreatic lipase-related protein 2 (GPLRP2) as biocatalyst to monitor in situ the lipolysis of monogalactosyl diacylglycerol (MGDG) in the form of mixed micelles with the bile salt sodium taurodeoxycholate (NaTDC). Residual substrate and lipolysis products (monogalactosyl monoacylglycerol (MGMG); monogalactosylglycerol (MGG) and octanoic acid (OA) were simultaneously quantified throughout the reaction thanks to specific proton resonances. Lipolysis was complete with the release of all MGDG fatty acids. These results were confirmed by thin layer chromatography (TLC) and densitometry after lipid extraction at different reaction times. Using diffusion-ordered NMR spectroscopy (DOSY), we could also estimate the diffusion coefficients of all the reaction compounds and deduce the hydrodynamic radius of the lipid aggregates in which they were present. It was shown that MGDG-NaTDC mixed micelles with an initial hydrodynamic radius rH of 7.3 ± 0.5 nm were changed into smaller micelles of NaTDC-MGDG-MGMG of 2.3 ± 0.5 nm in the course of the lipolysis reaction, and finally into NaTDC-OA mixed micelles (rH of 2.9 ± 0.5 nm) and water soluble MGG. These results provide a better understanding of the digestion of galactolipids by PLRP2, a process that leads to the complete micellar solubilisation of their fatty acids and renders their intestinal absorption possible.

Incorporation of Loratadine-Cyclodextrin Complexes in Oral Thin Films for Rapid Drug Delivery

Rapidly dissolving polymer thin films, or oral thin films (OTFs), have recently emerged as an improved oral drug delivery vehicle with its ability to bypass liver first pass metabolism, longer shelf-life, and simpler transport and distribution requirements, compared to traditional tablets and liquid formulations. Loratadine (LOR), an antihistamine commonly used to treat allergic rhinitis, undergoes liver first pass metabolism and is a prime candidate for incorporation within an OTF. However, loratadine is a BCS II drug with low aqueous solubility. Herein, the solubility of loratadine was improved by complexation with methyl β-cyclodextrin (MBCD) by co-evaporation of 2:1, 1:1, and 1:2 LOR:MBCD ratios and incorporation into a pullulan-based OTF at 4 wt% by solvent casting at 50 °C for 30 – 35 min. A therapeutically relevant 10 mg LOR dose could be prepared in a 3 cm by 3 cm OTF. The feasibility of complexation was observed with a Bs-type phase solubility diagram, and complexation itself was confirmed via differential scanning calorimetry (DSC) by disappearance of the LOR melting peak, Fourier-transform infrared spectroscopy (FTIR) by shifting of the C=O peak, via 1H NMR spectroscopy by downfield shifting and change in peak multiplicity of the LOR aromatic protons, and via diffusion-ordered spectroscopy by a decrease in the diffusion coefficient of LOR:MBCD complex. LOR:MBCD could be incorporated homogeneously throughout an OTF, and LOR:MBCD OTFs exhibited reasonable mechanical strength and endured 12 ± 3 folds before breaking. LOR:MBCD OTFs disintegrated within 38 ± 10 s. The cumulative in vitro release of LOR:MBCD OTFs peaked at 80 % within 3–4 min of dissolution, and LOR in LOR:MBCD OTFs exhibited permeability across a 0.22 μm nitrocellulose membrane, demonstrating its applicability as a rapid drug delivery vehicle.

The self-assembly of l-histidine might be the cause of histidinemia

l-Histidine is an essential amino acid with unique biochemical and physiological properties. Histidinemia is a disease condition caused by the elevated level of l-histidine in our blood. Mutations in the histidase, an enzyme for the breakdown of histidine, is the cause of the rise in histidine concentration. To our knowledge, no research has been done on why a high concentration of histidine causes histidinemia. In this study, we provide a potential explanation why the elevated levels of histidine in the human body causes histidinemia. In this study we have found that l-histidine self-assembled in water to form nano sheet structures at physiological pH and temperature, using 1D 1H NMR spectroscopy, diffusion ordered spectroscopy (DOSY) and scanning electron microscope (SEM) techniques. The kinetics of self-assembly has been studied using real time NMR spectroscopy. We observed that both the aromatic ring and aliphatic part are equally contributing to the self-assembly of l-histidine. The symptoms of histidinemia, neurological deficits and speech delays, are similar to that of the neurodegenerative diseases caused by the self-assembly of peptides and proteins. We speculate that the self-assembly of l-histidine might be the cause of histidinemia.

Review on NMR as a tool to analyse natural products extract directly: Molecular structure elucidation and biological activity analysis.

Natural products, the small organic molecules produced by plants, microbes and invertebrates, often present in the form of a mixture, this leads to the structural characterisation of natural extracts often requiring time-consuming multistep purification procedures. Nuclear magnetic resonance (NMR) technology is traditionally utilised as a tool for the structural elucidation of pure compounds. Contemporarily, an up-to-date trend in the application of NMR in natural product research is shifting to the direct NMR analysis of crude mixtures, to obtain molecular structure and biological activity information without performing cumbersome separation. To review works of literature on the evolution, principle and progress of NMR technologies for analysing mixtures, we focus on the successful application of NMR technologies in direct analysis of natural product extracts. Based on our research experience, academic tracking and extensive literature search, which involved, but not limited to, the use of various databases, like Web of Knowledge and PubMed. The keywords used, in various combinations, to retrieve recent literature on the successful application of NMR technologies to sheer natural product extracts, and excluded artificially natural product mixture and biofluid. NMR technologies for direct natural extracts analysis, including two-dimensional J-resolved spectroscopy (2D-JRES), pure shift NMR, diffusion-ordered NMR spectroscopy (DOSY), statistical correlation spectroscopy (STOCSY), concentration-ordered NMR spectroscopy (CORDY), saturation transfer difference (STD) and water-ligand observed via gradient spectroscopy (WaterLOGSY) were illustrated. By these methods, molecular structure and biological activity information will be directly obtained from NMR analysis of natural products extract, aiming to save experimental time and expenses.

Synthesis, Characterization, and Spectroscopic Studies of 2,6-Dimethylpyridyl-Linked Cu(I)-CNC Complexes: The Electronic Influence of Aryl Wingtips on Copper Centers.

Six new Cu(I) complexes containing pincer ligands of the type 2,6-bis(3-alkyl/arylimidazol-2-ylidene) methylpyridine I(R/R'Ar) ĈN̂C, where R = trifluoroethyl (TFE) and R' = 4-CF3, 4-NO2, 4-CN, 4-H, and 4-CH3, have been synthesized. These complexes, namely, [Cu(I(TFE)ĈN̂C)]PF6, 1-TFE; [Cu(ICF3Ar ĈN̂C]PF6, 2-CF3; [Cu(INO2Ar ĈN̂C)]PF6, 3-NO2; [Cu(ICNAr ĈN̂C]PF6, 4-CN; [Cu(IHAr ĈN̂C)]2(PF6)2, 5-H; and [Cu(ICH3Ar ĈN̂C)]2(PF6)2, 6-CH3, were fully characterized by 1H, 13C, and HMBC NMR spectroscopy, elemental analysis, electrochemical studies, and single-crystal X-ray crystallography. The crystallographic data revealed different structures and copper nuclearities for the complexes bearing aryl wingtips with electron-withdrawing (2-CF3, 3-NO2, and 4-CN) and electron-donating (5-H and 6-CH3) substituents. The solution-phase conductivity measurements in acetonitrile revealed a mix-electrolyte behavior for these complexes, supporting the presence of both mono- and binuclear forms of each complex. The fast monomer-dimer equilibrium of the Cu-CNC complexes at room temperature is reflected in their simple 1H NMR spectra in acetonitrile. However, both mono- and binuclear forms were identifiable in 1H diffusion-ordered spectroscopy (DOSY) at low temperatures. The dynamic behavior of these complexes in solution was further examined by variable-temperature 1H NMR (VT 1H NMR) experiments, and the relevant thermodynamic parameters were determined. The process was also probed by one-dimensional rotating-frame Overhauser enhancement spectroscopy (1D ROESY) experiments to elucidate the coexisting species in solution. The 2,6-dimethylpyridyl-linked Cu-CNC complexes also presented a quasi-reversible Cu(II)/Cu(I) couple in cyclic voltammetry studies, wherein a clear influence of the aryl wingtips on the E1/2 values was observed. Furthermore, the percent buried volumes (% Vbur) of the complexes were calculated, showing a similar steric hindrance around copper in all complexes. These findings support the importance of electronic effects, induced by the aryl wingtips, on the preferred coordination geometry, copper nuclearity, and redox properties of the Cu-CNC complexes.